3D Pose Estimation with YOLO + RealSense on Jetson

Develop and Deploy Advanced Manufacturing Solution

Module 1: ROS introduction and workspace setup

Introduction to ROS (8:53)
ROS architecture (17:06)
Install Ubuntu 20.4 on Virtual Box (14:39)
Install ROS Noetic (11:27)
Setup Visual Studio Code for ROS (4:08)

Module 2: ROS basics and tools (ROS)

Create ROS workspace (9:01)
The ROS master and the nodes (23:21)
Create a node in C++ (29:19)
Create a node in Python (14:28)
Create a publisher in C++ (14:31)
Create a subscriber in C++ (19:42)
Create a publisher in Python (12:48)
Create a subscriber in Python and play with Turtlesim (23:31)
Introduction on Services (18:01)
Create a service server in C++ (20:59)
Create a service client in C++ (16:28)
Create a service server in Python (11:50)
Create a service client in Python (15:07)
Create a custom msg (18:13)
Create a custom srv (4:43)
Final Project with Turtlesim (95:59)
ROS parameters (6:08)
ROS launch file (10:58)

Module 3: World Modeling and Simulation Environment (ROS & ROS2)

Github repository
Introduction to Gazebo (9:45)
How to structure your project (6:50)
Start to create your world (9:40)
Create your custom model (19:12)
How to load your world via launch file (8:57)

Module 4: Robot Modeling (ROS & ROS2)

Introduction to URDF file (7:41)
Strategy to model your custom Robot (8:20)
Start to create a custom Robot in URDF (12:48)
Visualize the Robot in Rviz (13:44)
Joint State and Robot State Publisher (10:24)
Complete you custom robot (19:59)
How to simplify your Robot model (15:05)
How to model a gripper as end effector (22:55)
How to clone a robot model from Github (33:21)
How to clone a commercial robot: Universal Robot 5 (UR5) (25:08)
How to setup a commercial Gripper: Robotiq (30:59)
Spawn your Robot in Gazebo (11:54)

Module 5: ROS Control (ROS)

Introduction to ROS Control (8:17)
How to calculate intertia values for your custom robot (22:01)
How to configure transmission for the joints of your custom robot (14:57)
How to put a Gazebo plugin (14:12)
How to create and configure controllers for your Custom Robot Joints (17:08)
How to spawn controllers of your robot joint (19:30)
How to tune PID Controllers for your Custom Robot Joints (87:26)
Forward Kinematics with Custom Robot (9:48)
How to use Transform (3:31)
Hot to grasp an object in Gazebo without slipping (26:33)
JointPositionController VS JointTrajectoryController (12:52)

Module 6: Inverse Kinematics with MoveIt and Pick and Place Application (ROS))

Introduction to MoveIt (12:08)
Create a MoveIt configuration Package (19:00)
Play with Motion Planning and update the MoveIt package (36:37)
ROS Control for MoveIt (11:09)
Create an Inverse Kinematics node (28:55)
How to setup the orientation and position of the end effector (19:30)
How to make Collision Objects in Rviz (23:37)
How to code Pick and Place (51:06)
How to adapt the inverse Kinematics node to another robot (37:30)
How to code Pick and Place with Grasp Class

Module 7: Run the Application in Gazebo (ROS)

Course check point and introduction to the module
The Structure of the Launch file (11:23)
Control your robot with MoveIt motion planning plugin (11:34)
Simulate a pick and place in Gazebo (25:03)

Module 8: Perception for Robotics with OpenCV (ROS & ROS2)

Why Computer Vision in Robotics (20:33)
Strategy to integrate perception with robotic arm (14:01)
Type of Perceptions: HSV (11:53)
Type of Perceptions: SURF (6:21)
Type of Perceptions: PCL (4:05)
How to deploy a 2D camera (23:52)
Get an Image with OpenCV (37:04)
Stream the Image with OpenCV (6:15)
Edge Detection with OpenCV (46:49)
Get the position of the object in the Image (46:03)
Convert the object position with the respect of camera_link (80:14)

Module 9: Perception for Robotics with PCL (ROS & ROS2)

Setup the working environment with UR5 (27:46)
How to deploy a 3D camera (26:56)
Write and Read Point Cloud data (41:39)
Use the Voxel filter (25:46)
Create a plane segmentation (27:48)
Apply a pass through filter (12:28)
Extract a cylinder and get it's position (41:22)

Module 10: Pick and Place using camera (ROS)

How to tackle this project (9:13)
Adapt the Computer Vision node (16:43)
Create the service to transform data from camera_link to base_link frame (61:42)
Pick and Place with 2D camera (53:54)
Pick and Place with Grasp class (36:21)
Pick and Place with UR5 and Robotiq gripper in Gazebo / real word (38:53)
Pick and Place with UR5 Robotiq gripper and 3D camera (9:58)

Module 11: Waypoints and Optimize the Trajectory (ROS)

Establish movement repetability (17:12)
What are waypoints and how to use it
How to set Joints Constraints (22:01)
How to draw a circle (19:50)
How to save waypoints and execute trajectory (30:20)
Wrap up and what's next

Module 12: ROS2 Humble (ROS2)

Differences between ROS and ROS2 (10:51)
ROS and ROS2 distributions
Install and setup ROS2 Humble (14:04)
Create ROS2 Workspace (9:19)
Install VS code in Ubuntu 22.04 and ROS2 setup (4:18)
Create packages and basic node in C++ (37:39)
Write a Topic Publisher Subscriber in C++ (37:30)
Create packages and basic node in Python (30:00)
Write a Topic Publisher Subscriber in Python (21:46)
Create Custom Interface (11:47)
Write a service in Python (15:38)
Write a Service in C++ (17:55)
ROS parameters in ROS2 (29:57)
Create a Launch file (30:50)

Module 13: Migrate your project from ROS1 to ROS2 (ROS2)

Repository of this Module
Migration strategy (9:22)
Migrate custom robot description package (28:23)
ROS2 Control: understanding and deploying Joint Group Position Controller (54:23)
ROS2 Control: setup and deploy Gripper Action Controller (16:20)
ROS2 Control: setup and deploy Joint Trajectory Controller (12:19)
ROS2 Control: Control the robot sending trajectory_msgs from C++ script (11:43)
Replicate the .world from ROS1 (8:31)
Deploy depth camera and the pick object (25:45)
Create MoveIt2 configuration package for a custom robot (55:40)
How to interface Moveit2 with Gazebo (18:24)
Create an inverse kinematics node with MoveIt2 in C++ (23:39)
How to simulate grasping with LinkAttacher in Gazebo (11:38)
Pick and place with a Custom robot: Gazebo interfaced with Rviz (30:27)
UR5, Depth Camera setup in Gazebo with MoveIt (81:24)
Add Robotiq gripper to UR5 and setup in Gazebo with MoveIt (62:50)
Setup the world and LinkAttacher for grasping (15:34)
Test inverse kinematics with UR5 (20:46)
Run Pick and Place with UR5 and Robotiq gripper (8:26)
Point Cloud Library and 3D processing in ROS2 (52:12)
Pick and Place with UR5 Robotiq Gripper using 3D camera in ROS2 (31:58)
Resources and GitHub repository of the master class
How to make your packages portable
Fixing MoveIt Setup Assistant (MSA) Crash after ROS2 Updates

Module 14: Docker for Robotics (ROS & ROS2)

Introduction - Why Docker for Robotics - Installation and Setting up your Environment (22:32)
What is Docker under the Hood (13:19)
How to Create an Image for simulating UR5 Gazebo with Rviz and MoveIt (50:03)
How to run a Container (17:45)
Volumes: Making Data Persistent (19:26)
Using Docker for Complex Hardware — Isaac ROS RealSense Example (21:10)
Multi-Container Robotics with Docker Compose: Connecting Services and Using the Host GUI (33:58)
GUI in Docker (for Rviz, Gazebo, rqt) (12:43)
Using Docker in VS Code and final wrap-up (13:31)
Common Docker Commands Cheatsheet

Module 15: Robotics Applications and LLM [Ollama] Integration in ROS2

Creating the ROS2 Workspace & Cloning xarm_ros2 (12:02)
Building the Custom Package my_xarm6: Robot, World, and Camera Setup (63:25)
Creating the my_xarm6_app Package: First Motion Node (26:46)
CNC Motion Node: Drawing Circles and Squares with Constant Orientation (37:50)
Blind Pick and Place: Fixed Object Positions (29:03)
Vision Integration with OpenCV: Depth Reconstruction via Intrinsics (38:32)
Vision-Based Pick and Place + Custom Service Definition (35:17)
Introduction to Ollama and LLM Integration (12:17)
LLM Task Pipeline: Designing the Action-Oriented Architecture and System Prompt engineering (55:45)
LLM-Driven Pick and Place: Updating System Prompt + Vision + Motion Integration (45:48)
Test Robotics Tasks with LLM Ollama integrated in ROS2 (21:26)
General Task LLM: Unified Prompt and Full Robot Commanding (CNC, pick place with vision, end effector control)) (24:59)

Simulation to Reality: Build real Robotics task with 6Axis Robot (FR3WML + SoftGripper + Suction cup) [Available on April 2026]

Module available on April 2026
Simulation to Reality – Building a Real Industrial Robotic Pipeline - Introduction (9:06)
Setup comunication between PC and Robot Hardware controller (8:22)
Understanding the Robot Driver Layer: How to Interface Any Robot Controller with ROS2 (26:54)
How to Create a Bridge to Interface MoveIt with Robot Controller (33:50)
Gripper Hardware setup (6:54)
Bridging Digital Outputs to ROS2 Gripper Control (20:54)
Building a Custom ROS2 Robot Package: Adding a Gripper and Camera to the FR3WML (18:17)
Designing a Real ROS2 Robot Architecture with MoveIt (12:21)
Integrating a Gripper (SoftGripper) into MoveIt (47:59)
Control Robot Speed from ROS2 and MoveIt (24:33)
Move the Real Robot with MoveIt Inverse Kinematics (22:42)
Hardware Architecture for Pick and Place with 3D Camera (17:31)
Jetson Orin Nano Setup for Real-Time RealSense Streaming with Docker (31:24)
Software Architecture -- From Camera Streaming to Local AI Inference (29:47)
Create the Inference Container on Jetson Orin Nano (YOLO + ROS2) (21:44)
3D Pose Estimation with YOLO + RealSense on Jetson (17:56)

Wrap up and next steps

Wrap up
Next steps

Additional module to be defined based on student's needs and requests

Lessons under constructions

Teach online with

3D Pose Estimation with YOLO + RealSense on Jetson

Lesson content locked

If you're already enrolled, you'll need to login.

Enroll in Course to Unlock